I 35
I pumps

Use

Use and maintenance manual

The best solution for the suction and transfer of liquids, thanks to the strong self-priming capacity, the ability to run even with discontinuous presence of the liquid in suction and the reversibility of the flow. The I series is made of CB754S brass with a stainless steel shaft. This version with support and pulley allows easy coupling with any motor. For each application, it is necessary to check the suitability and choose appropriate gaskets.

The product are particularly suitable for use:

nautical (bilge, services, cooling, washing, sea water)
agriculture (fungicides, liquid fertilizers, components on agricultural machinery, irrigation)
transports (tankers, road machines, on board water systems)

Hydraulic specifications

Maximum capacity : 166 lt/min
Maximum head : 65 m
Gasket on the shaft: Seal
Maximum priming height : 6 m
Threaded ports: 1"½
Maximum liquid density 1.1g/cm³ free of hard particles in suspension
Maximum temperature 90°C
Not suitable for aggressive liquids towards pump construction materials and gaskets (see technical specifications)
Not appropriate for the transfer of petrol, solvents and, in general, in environments with risk of explosion and fire
Possibility of reversing the pumping flow
Complete with a pair of brass hose fittings for pipes 35 (one straight and one curved)
Possibility of working for short periods with closed pipes
During installation, the pump must be filled with liquid, subsequently this operation is no longer necessary

Technical specifications

Prepared for connection via pulley 1A72

Material

Pump Parts: Brass
Shaft : AISI 304
Impeller : Brass
Gaskets: NBR

Pump features
Ports	∅ Hose fitting	Priming ability	Qmax	Hmax
1"½	35 mm	6 m	166 lt/min	65 m

Overall dimensions
W	L	H	Weight
298 mm	158 mm	180 mm	6.5 kg

1400 g/min
H (m)	1m	5m	10m
Q	89 lt/min	71 lt/min	43 lt/min
HP	0.5 HP	0.6 HP	0.7 HP

1900 g/min
H (m)	1m	5m	10m
Q	123 lt/min	108 lt/min	90 lt/min
HP	0.9 HP	0.9 HP	1.0 HP

2800 g/min
H (m)	1m	10m	20m	30m
Q	166 lt/min	150 lt/min	129 lt/min	105 lt/min
HP	2.6 HP	2.9 HP	3.2 HP	3.5 HP

Characteristics referring to operation with water at 20 °

Available for the hydraulic part on request

BY-PASS

By-pass 30

FOR USE AND TRANSPORT

Feet for ceiling fixing
Feet for fixing to: wall

Liquids loading / unloading

Filler plug (brass)
Drain tap (brass)

SEALS

Mechanical seal
Viton 30/40 gaskets

SPECIAL PORTS

Ports Macon 40 (brass)

You can complete the I 35 with...

Bottom filter 30

Related products

I 25

I 40

I 35
I pumps